Author Topic: Sparkbridge @ $40! Soundproof @ $280! Package @ $300!  (Read 34317 times)

Offline wrxykh

  • Cool Engine (0 rpm)
  • Posts: 43
Re: SPARK BRIDGE installation CONTINUES....... !!
« Reply #60 on: September 16, 2009, 10:51:43 AM »
Hi Issac,

Thanks for coming to my place to install!

Tested it this morning, the car did not feel as sluggish as it used to be, so I think it works. Still, I will need to drive more to have more conclusive outcome.

BTW, I noticed that my engine's idling has dropped to 500rpm (while in Drive mode), and can feel the vibration of the engine. (the RPM used to be around 700).

Will have more evaluation about the above wield behavior.

Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: SPARK BRIDGE installation CONTINUES....... !!
« Reply #61 on: September 16, 2009, 10:54:44 AM »
Hi Issac,

Thanks for coming to my place to install!

Tested it this morning, the car did not feel as sluggish as it used to be, so I think it works. Still, I will need to drive more to have more conclusive outcome.

BTW, I noticed that my engine's idling has dropped to 500rpm (while in Drive mode), and can feel the vibration of the engine. (the RPM used to be around 700).

Will have more evaluation about the above wield behavior.


no problem. do let me know when you decide to go go-karting.. hehehe!

Offline foofam77

  • Low End (2000 rpm)
  • **
  • Posts: 369
Re: SPARK BRIDGE installation CONTINUES....... !!
« Reply #62 on: September 17, 2009, 03:27:28 PM »
hey isaac

if i want to change my car battery, would the workshop(be it TCM or others) help to disconnect my spark-bridge and ez-tab connections and then, fix them back after installing the new battery?

thanks

Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: SPARK BRIDGE installation CONTINUES....... !!
« Reply #63 on: September 18, 2009, 12:10:04 AM »
hey isaac

if i want to change my car battery, would the workshop(be it TCM or others) help to disconnect my spark-bridge and ez-tab connections and then, fix them back after installing the new battery?

thanks

i believe it will take minimum effort.

Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: Sparkbridge? SPARKBRIDGE! come in!
« Reply #64 on: September 29, 2009, 05:22:45 PM »
woot

Offline robtan99

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 514
Re: SPARK BRIDGE installation CONTINUES....... !!
« Reply #65 on: September 29, 2009, 05:54:44 PM »

I think when i change the battery that time, they never even touch all my connections. (amplifier, woofer, spark plug, pivot etc).  What i can see they simply take up the top part and link to the new battery.

hey isaac

if i want to change my car battery, would the workshop(be it TCM or others) help to disconnect my spark-bridge and ez-tab connections and then, fix them back after installing the new battery?

thanks

Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: Sparkbridge? SPARKBRIDGE! come in!
« Reply #66 on: January 14, 2010, 12:38:12 PM »
back in business. =]

ring me up @ 91544534.

those who have contacted me previously, i will be contacting you soon!

Offline wind79

  • Cool Engine (0 rpm)
  • Posts: 48
Re: Sparkbridge? SPARKBRIDGE! come in!
« Reply #67 on: January 18, 2010, 03:43:27 PM »
Hi Vypez,

Thanks for coming to my place to install the SB.
Its been working great over the weekend!

Offline d.titan

  • Idling (800 rpm)
  • *
  • Posts: 126
Re: Sparkbridge? SPARKBRIDGE! come in!
« Reply #68 on: January 19, 2010, 08:42:00 AM »
Hi Boss,
Can do all 4 points Sparkbridge?
What type of cable u providing? High temp, Fire Retard..type
A bit concern as the wire is just above the engine and
i suppose its very hot..
Thanks

Offline wind79

  • Cool Engine (0 rpm)
  • Posts: 48
Re: Sparkbridge? SPARKBRIDGE! come in!
« Reply #69 on: January 21, 2010, 05:01:45 PM »
back in business. =]

ring me up @ 91544534.

those who have contacted me previously, i will be contacting you soon!

Hi Vypez,

You got do grounding as well?

Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: Sparkbridge? SPARKBRIDGE! come in!
« Reply #70 on: January 22, 2010, 12:06:15 AM »
Hi Vypez,

You got do grounding as well?


yup. i can do also, but trust me when i say marginal difference.

Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: Sparkbridge? SPARKBRIDGE! come in!
« Reply #71 on: January 22, 2010, 12:08:23 AM »
Hi Boss,
Can do all 4 points Sparkbridge?
What type of cable u providing? High temp, Fire Retard..type
A bit concern as the wire is just above the engine and
i suppose its very hot..
Thanks

can do all 4 points, but difference is very little and it makes it MUCH harder.
wires are just basic 10awg wires, high temp of course, not fire retarded or IP rated though.

it is pretty hot, however it won't melt or corrode away. no worries on that.

Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: Sparkbridge @ $40! read the reviews, 30pages long!
« Reply #72 on: January 25, 2010, 11:09:04 PM »
refresh. =]

Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: Sparkbridge @ $40! read the reviews threads in pg1, 30pages long!
« Reply #73 on: January 25, 2010, 11:12:35 PM »
Hi Guys,

Spark Bridging is basically grounding of your spark plugs and it helps the acceleration of the initially sluggish pick-up of the latio.

doing sparkbridge, for more information please read the original sparkbridge thread :

http://forum.thelatioclub.org/index.php?topic=8647.msg154673

more reviews and info :

http://forum.thelatioclub.org/index.php?topic=6326.0

my no. is 91544534 if you require any more information.

Cost of Sparkbridging is $40 including installation! $50 for mobile service!


Cheers guys.

Isaac
91544534

refresh

Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: Sparkbridge @ $40! read the reviews threads in pg1, 30pages long!
« Reply #74 on: February 17, 2010, 09:51:10 PM »
material used is alpha, from korea. thin and light, yet extremely effective.

reduces ROAD NOISE, RAIN NOISE, EXHAUST NOISE, ENGINE NOISE and VIBRATIONS!

100cm x 50cm - $25 (for DIY)
4 DOORS SINGLE LAYER - $160
4 DOORS DOUBLE LAYER - $280
FLOORPAN - $500
ROOF - $320
BOOT - $280(sedan)
WHEEL ARC - $40 each pair
FENDER - $40 each pair


4 DOORS DOUBLE LAYER + 4 FENDERS + 4 WHEEL ARC @ $280 (done at your doorstep at no extra charge!)


Sparkbridge @ $20 extra if doing up soundproof.


all prices include installation.

any enquiries, please do not hesitate to reach me @ 91544534. thanks!








Offline vypez

  • Honorary MG
  • Max Torque (4400 rpm)
  • *
  • Posts: 2,059
  • life isn't just about racing.
    • need help with words?
Re: Sparkbridge @ $40! Soundproof @ $280! Package @ $300!
« Reply #75 on: March 02, 2010, 03:10:46 AM »
woots.

Offline scoobydoo

  • Low End (2000 rpm)
  • **
  • Posts: 155
  • Have wheels will travel... Latio + Silver Wing
Re: Sparkbridge @ $40! read the reviews threads in pg1, 30pages long!
« Reply #76 on: March 19, 2010, 04:20:45 PM »
material used is alpha, from korea. thin and light, yet extremely effective.

reduces ROAD NOISE, RAIN NOISE, EXHAUST NOISE, ENGINE NOISE and VIBRATIONS!

4 DOORS DOUBLE LAYER + 4 FENDERS + 4 WHEEL ARC @ $280 (done at your doorstep at no extra charge!)

Sparkbridge @ $20 extra if doing up soundproof.

all prices include installation.
as arranged, see you tomorrow at 2+pm :w00t:
Drive Safe + Ride Safer = Better Chances of Recovering Our Blood-n-Sweat CPF $$

ICE: Alpine CDA9886 + Infinity REF475A + FS Moving Air Clarity Mk II & 10" e2 Cube Subs + 2 layers sound dampening
Others: Alutec strut + Ultra Racing anti-roll bar + red spring stiffeners front/rear + UTR Evo 5000 + UTR air filter

Offline wind79

  • Cool Engine (0 rpm)
  • Posts: 48
Re: Sparkbridge @ $40! Soundproof @ $280! Package @ $300!
« Reply #77 on: September 14, 2010, 05:58:09 PM »
Bro Vypez,

I am unsatisfied with the installation and you promised to check out my soundproofing for me last week.
Please return my calls, I stay in Bishan and you know who I am.

Offline wind79

  • Cool Engine (0 rpm)
  • Posts: 48
Re: Sparkbridge @ $40! Soundproof @ $280! Package @ $300!
« Reply #78 on: September 21, 2010, 06:38:03 PM »
Anyone knows what happened to Vypez? He seems to have disappeared.
Call him also never answer...