1) gently remove the plastic C shaped-clip from door open handle with a flat head screw driver
2) remove the door cup (where the power window switch & where u pull the door to close) is located by flat head screw driver
3) use philip head screw driver to unscrew 2 screws from the door panel (where the door cup is previously located)
4) use your hand to pull the door panel starting from base edge then move upwards along the edge
to install back, do vice versa.....
Happy DIYing.......remember to do steps 1 & 2 gently as these are plastic parts with hook and they break easily.....