Nissan Car Lounge - Almera, Juke, Latio, Qashqai, Sylphy, Teana Owners > Latio

door button not sensitive

<< < (2/2)

haido:
I also have this problem and yes it is caused by the camera as it started after i install the camera, works fine when the camera power is off.

What kind for interference are you referring to? Were you able to rectify your problem?

gatier:

--- Quote from: haido on May 02, 2013, 11:09:40 AM ---I also have this problem and yes it is caused by the camera as it started after i install the camera, works fine when the camera power is off.

What kind for interference are you referring to? Were you able to rectify your problem?

--- End quote ---

The I-Key Sensor to lock and unlock door is on the "holder" between the rear view mirror and the glass.

have no time to try to rectify yet, most simple is to shift camera/wire away from it .... other may be wrap foil around camera wire ??

 

gnoyee:
I remove the connector behind the and waited about 5 min and plug it back.

Now is more responsive as previous... Not sure what is the problem.. but sometime i still cannot open the door with the button.

brianz_410:
I have the problem as well and realised that sometime actually was due to me holding my HP and keys at the same hand. Think the frequency affect the sensor.

Navigation

[0] Message Index

[*] Previous page