Nissan Car Lounge - Almera, Juke, Latio, Qashqai, Sylphy, Teana Owners > Latio

Window washer fluid reservoir

(1/4) > >>

iagree:
Hi all,

The window washer fluid reservoir, how do u check the fluid level, the manual says to use finger to plug the center hole of the cap/tube assembly, then remove it from the reservoir to check the fluid level?

Need to add fluid to what level? normal plain water also can add right?

i check the manual, it says add a washer solvent to the water for better cleaning?

pls help.
thanks.

NSman:
i don check, normally i filled till i see the water. just plan water will be good, was told by autosaver mech, if using silicon wiper, no need to add any cleaning solvent.

xuan511:
my friend added some cleaning agent which makes the water like foam wash

HJB:

--- Quote from: NSman on June 10, 2008, 09:43:42 PM ---i don check, normally i filled till i see the water. just plan water will be good, was told by autosaver mech, if using silicon wiper, no need to add any cleaning solvent.

--- End quote ---

If the window's very dirty, then it's good to have the cleaning solvent (like travelling in MY).

xuan511:

--- Quote from: HJB on June 11, 2008, 09:48:13 AM ---If the window's very dirty, then it's good to have the cleaning solvent (like travelling in MY).

--- End quote ---

make sure its good enuff to remove egg whites/yolk

Navigation

[0] Message Index

[#] Next page