Author Topic: depress brake all the way  (Read 8641 times)

Offline iwilly

  • Low End (2000 rpm)
  • **
  • Posts: 413
depress brake all the way
« on: March 14, 2009, 11:47:05 PM »
normally when parking, do u depress the leg brake all the way down or juz halfway?
道不同,不相为某

Offline mindman

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 493
Re: depress brake all the way
« Reply #1 on: March 15, 2009, 12:06:56 AM »
normally when parking, do u depress the leg brake all the way down or juz halfway?

all the way down.

cheers

Offline Silver

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 900
Re: depress brake all the way
« Reply #2 on: March 15, 2009, 12:23:08 AM »
normally when parking, do u depress the leg brake all the way down or juz halfway?


same as you would "pull" up the handbrake all the way ........
Be safe. Go with the flo.

Offline latioboy91

  • High End (5000 rpm)
  • *****
  • Posts: 2,738
  • No More Latio, Doesn't Mean I'm NO more a Lation.
Re: depress brake all the way
« Reply #3 on: March 15, 2009, 12:31:31 AM »
normally when parking, do u depress the leg brake all the way down or juz halfway?

wah all the way down means later when u depress again to bring it up, its very hard. haha. usually jus push it and hear about 3 clicks haha!
Modifications are NEVER ending only if your wallet's money is NEVER ending.

One must learn how to control his spending on MODIFICATIONS. (:

BUT, i dun care. So? MODIFICATIONS IS YES FOR ME!

Offline burnolise

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 494
Re: depress brake all the way
« Reply #4 on: March 15, 2009, 08:25:08 AM »
wah all the way down means later when u depress again to bring it up, its very hard. haha. usually jus push it and hear about 3 clicks haha!

I think same as hand brake....if you consistently push it all the way down....the foot brake will become loose over time just like hand brake and u realised u need to push it all the way down more.....but when servicing...they should adjust it for you and it will be fine.....i used to pull the hand brake of my previous all the way up....and then over time...i find tat it is not tat good.........
If you r not part of a solution, don't be part of the problem...

The Art of losing isn't hard to master.
SO many things seem filled with intent to be lost that their loss is no disaster...

Offline Silver

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 900
Re: depress brake all the way
« Reply #5 on: March 15, 2009, 09:40:15 AM »
that is due to the wearing down of the brake pads
Be safe. Go with the flo.

Offline SoL

  • Low End (2000 rpm)
  • **
  • Posts: 219
Re: depress brake all the way
« Reply #6 on: March 15, 2009, 10:02:35 AM »
that is due to the wearing down of the brake pads

I think we're talking about the parking brake. It won't wear out unless you drive off with it~!  ;D

Offline Silver

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 900
Re: depress brake all the way
« Reply #7 on: March 15, 2009, 10:07:36 AM »
i meant that the parking brake activates the brake pads to "hold" the car in a parking position

so as the brake pads wear out under normal braking, the travel distance required to fully engage the parking mechanism is increased due to the bigger clearance of the pads to the disc/drum
Be safe. Go with the flo.

Offline SoL

  • Low End (2000 rpm)
  • **
  • Posts: 219
Re: depress brake all the way
« Reply #8 on: March 15, 2009, 11:28:37 AM »
Err, isn't the parking brake a seperate brake pad? On most cars its a smaller pad, activated by wire tension instead of fluids. Not too sure on Latio, you may be right!

Offline CustomGolf

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 1,027
Re: depress brake all the way
« Reply #9 on: March 15, 2009, 02:12:38 PM »
Err, isn't the parking brake a seperate brake pad? On most cars its a smaller pad, activated by wire tension instead of fluids. Not too sure on Latio, you may be right!

Parking brakes are normally on the rear wheel. It should be usingthe same brake pads as the normal brakes.

Offline Midnight

  • Low End (2000 rpm)
  • **
  • Posts: 355
Re: depress brake all the way
« Reply #10 on: March 15, 2009, 03:28:09 PM »
normally when parking, do u depress the leg brake all the way down or juz halfway?

On level ground, just one click will do, if slope, 2 clicks. SO far, 2 clicks are sufficient for me before i put the gear to 'P'.


Offline SoL

  • Low End (2000 rpm)
  • **
  • Posts: 219
Re: depress brake all the way
« Reply #11 on: March 15, 2009, 03:38:10 PM »
On level ground, just one click will do, if slope, 2 clicks. SO far, 2 clicks are sufficient for me before i put the gear to 'P'.



2 clicks if okay until you start throwing in suitcases and stuff and the car rolls down the slope with the weight. Heheh never happened before, just saying, but why not push down more? I use around 4 clicks on slopes. Better to be safe then sorry!  :bleh:

Offline AhXiong

  • Low End (2000 rpm)
  • **
  • Posts: 238
Re: depress brake all the way
« Reply #12 on: March 15, 2009, 05:46:00 PM »
On level ground, 1-2 clicks for me.
If slope, then I step all the way down loh
How come everybody post count all so high?
Chiong arrgghhhh. +1  :uppercut:

Offline Toalson

  • Low End (2000 rpm)
  • **
  • Posts: 297
Re: depress brake all the way
« Reply #13 on: March 15, 2009, 09:17:13 PM »
I think we're talking about the parking brake. It won't wear out unless you drive off with it~!  ;D

I recently did that  :ohmy: and was wtf when the car keep sounding the warning alarm, tot was tat i drop my ikey. Silly me.  :hammer:

Offline pizzaboy

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 601
Re: depress brake all the way
« Reply #14 on: March 16, 2009, 01:55:13 PM »
u mean when parkin foot brake not release ther would be warnin sound to alert the driver?

Offline Midnight

  • Low End (2000 rpm)
  • **
  • Posts: 355
Re: depress brake all the way
« Reply #15 on: March 16, 2009, 08:11:22 PM »
2 clicks if okay until you start throwing in suitcases and stuff and the car rolls down the slope with the weight. Heheh never happened before, just saying, but why not push down more? I use around 4 clicks on slopes. Better to be safe then sorry!  :bleh:


I would think it works like the handbrake. u pull it too hard often, it will become loose. Then u will find that it does not hold anymore when u really need it on a real steep slope! So usually i just depress about enough. It really steep slope, i think maybe 3 clicks.  :smile:

Offline SoL

  • Low End (2000 rpm)
  • **
  • Posts: 219
Re: depress brake all the way
« Reply #16 on: March 16, 2009, 09:48:11 PM »

I would think it works like the handbrake. u pull it too hard often, it will become loose. Then u will find that it does not hold anymore when u really need it on a real steep slope! So usually i just depress about enough. It really steep slope, i think maybe 3 clicks.  :smile:

I happened to have the Nissan service manual for Versa(US version of Latio), and their handbrake is wire activated. So I would imagine its the wire becoming loose after a long time. Should be able to ask the mechanic to tighten for you when servicing.

Offline LatioR

  • Low End (2000 rpm)
  • **
  • Posts: 449
Re: depress brake all the way
« Reply #17 on: March 17, 2009, 11:23:38 PM »
u mean when parkin foot brake not release ther would be warnin sound to alert the driver?

ya lor..never heard of alarm when I drove with brake on lei?

Offline Toalson

  • Low End (2000 rpm)
  • **
  • Posts: 297
Re: depress brake all the way
« Reply #18 on: March 18, 2009, 12:23:41 AM »
ya lor..never heard of alarm when I drove with brake on lei?

Well mine did when I forgot abt the foot brake and started driving. Or maybe its for FL only. :confused1: