Nissan Car Lounge - Almera, Juke, Latio, Qashqai, Sylphy, Teana Owners > Latio

Jump start

(1/3) > >>

alghojo:
read in the latio owners manual, qoute

Always connect positive + to positive + and negative - to body ground. NOT to the battery's negative.

This is something new to me as from all my previous jump start i always connect positive to positive and negative to negative. Maybe  i'm doing it wrong all this while.

Silver:
not maybe, is confirmed

but most people will connect cables terminals to terminals and remove in the wrong sequence too (why? because they do not read the manuals .....)

magnum:
and make sure  lights are off when jump start....

Midnight:

--- Quote from: alghojo on March 01, 2009, 09:48:52 AM ---read in the latio owners manual, qoute

Always connect positive + to positive + and negative - to body ground. NOT to the battery's negative.

This is something new to me as from all my previous jump start i always connect positive to positive and negative to negative. Maybe  i'm doing it wrong all this while.

--- End quote ---

Dear alghojo,

Connect one of the -ve terminal of yr jumper cable to ground, which could be any unpainted nuts  u see around the engine bay. Usually i clip it to the nuts of the shock absorber which is by the side of the engine bay. So that both cars are connected via a 'common' ground.

LatioR:

--- Quote from: Silver on March 01, 2009, 09:52:30 AM ---not maybe, is confirmed

but most people will connect cables terminals to terminals and remove in the wrong sequence too (why? because they do not read the manuals .....)

--- End quote ---

Hi bro Silver, is this only apply to latio or general for jump start? Believed the cab driver has helped me once with +ve to +ve and -ve to -ve on my previous drive (16.5yrs of corolla, 1.6M). Thanks to advise

Navigation

[0] Message Index

[#] Next page