Author Topic: Pls advice...  (Read 11304 times)

Offline kenny59

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 693
  • C'mOm Let'S Play...
Pls advice...
« on: October 11, 2009, 12:59:25 PM »
Hi all brothers...I will like to check if any of u here have change the original suspension (just damper) to original or aftermarket brand?If yes pls kindly lemme know the prices and where to do it,best still is any of u know where can get good lobang for this item.Thxs in advance...
Speed & Power is nothing when you can't control it.

http://www.youtube.com/watch?v=F2EzFNQJotA

Offline crusty69

  • Low End (2000 rpm)
  • **
  • Posts: 431
Re: Pls advice...
« Reply #1 on: October 11, 2009, 02:20:43 PM »
Hi all brothers...I will like to check if any of u here have change the original suspension (just damper) to original or aftermarket brand?If yes pls kindly lemme know the prices and where to do it,best still is any of u know where can get good lobang for this item.Thxs in advance...

bro,, can try this thread at MCF,..can give some information...

http://www.mycarforum.com/index.php?showtopic=2637615&st=0

3rd post on page 1

"mandrain auto tel 62938491 @ veerasamy road"
« Last Edit: October 11, 2009, 02:22:14 PM by crusty69 »
If you wanna dream,  dream BIG !

Offline kspchew

  • Low End (2000 rpm)
  • **
  • Posts: 320
Re: Pls advice...
« Reply #2 on: October 11, 2009, 09:25:39 PM »
Hi all brothers...I will like to check if any of u here have change the original suspension (just damper) to original or aftermarket brand?If yes pls kindly lemme know the prices and where to do it,best still is any of u know where can get good lobang for this item.Thxs in advance...

You can try, Chin Hon motors & tradings, they carry KYB shocks, approx $90/shock for front and $50/shock for the back.

Stocks might be arriving next week.

 Address :  62 Race Course Road
 
Telephone  :  62963915
 
Fax  :  62966306
 
 

Offline crusty69

  • Low End (2000 rpm)
  • **
  • Posts: 431
Re: Pls advice...
« Reply #3 on: October 11, 2009, 10:52:17 PM »
You can try, Chin Hon motors & tradings, they carry KYB shocks, approx $90/shock for front and $50/shock for the back.

Stocks might be arriving next week.

 Address :  62 Race Course Road
 
Telephone  :  62963915
 
Fax  :  62966306
 
 

woo ! $50/shock for per damn cheap,...  power :thumbsup:
If you wanna dream,  dream BIG !

Offline nakshire

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 854
  • I'm a cute boy ok!
Re: Pls advice...
« Reply #4 on: October 12, 2009, 12:22:45 AM »
yep its cheap...

but must check reliability. is this brand good?

Offline crusty69

  • Low End (2000 rpm)
  • **
  • Posts: 431
Re: Pls advice...
« Reply #5 on: October 12, 2009, 01:11:16 AM »
yep its cheap...

but must check reliability. is this brand good?

someone mentioned tat kyb is latio stock absorber if I'm not wrg
If you wanna dream,  dream BIG !

Offline Ying

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 845
Re: Pls advice...
« Reply #6 on: October 12, 2009, 09:15:10 AM »
I am interested to change absorber too.. pls update.

Offline kenny59

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 693
  • C'mOm Let'S Play...
Re: Pls advice...
« Reply #7 on: October 12, 2009, 03:58:33 PM »
Thanks u guys for all the input...Cheers n hope to see u ard on the road. :thumbsup:
Speed & Power is nothing when you can't control it.

http://www.youtube.com/watch?v=F2EzFNQJotA

Offline kspchew

  • Low End (2000 rpm)
  • **
  • Posts: 320
Re: Pls advice...
« Reply #8 on: October 12, 2009, 05:55:10 PM »
I am interested to change absorber too.. pls update.

Just call Chin Hon, stocks have not arrived yet.
OT a bit, do the bros here experience jamming of their shocks?
Went for service at AS and they told me my front right shock had jammed.

Thanks

Offline crusty69

  • Low End (2000 rpm)
  • **
  • Posts: 431
Re: Pls advice...
« Reply #9 on: October 12, 2009, 07:51:10 PM »
Just call Chin Hon, stocks have not arrived yet.
OT a bit, do the bros here experience jamming of their shocks?
Went for service at AS and they told me my front right shock had jammed.

Thanks

jammed, ? as in the car now senget a bit ?
If you wanna dream,  dream BIG !

Offline kspchew

  • Low End (2000 rpm)
  • **
  • Posts: 320
Re: Pls advice...
« Reply #10 on: October 13, 2009, 08:32:05 AM »
jammed, ? as in the car now senget a bit ?

Nope, just that there are occasional "pong" sound when going over hump quickly or braking too hard.

Offline ally

  • Cool Engine (0 rpm)
  • Posts: 29
Re: Pls advice...
« Reply #11 on: October 13, 2009, 09:15:24 AM »
Nope, just that there are occasional "pong" sound when going over hump quickly or braking too hard.

Maybe your exhaust pipe a bit loose, banging against chassis?   :confused1:

Offline Ying

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 845
Re: Pls advice...
« Reply #12 on: October 13, 2009, 09:29:58 AM »
car is 4 yrs+, so I am looking for a more comfort absorber as replacement. Current set still ok but I find it a bit harder than before.

Offline clarence

  • Max Torque (4400 rpm)
  • ****
  • Posts: 1,579
Re: Pls advice...
« Reply #13 on: October 13, 2009, 11:49:32 AM »
Monroe shocks are good.

Offline kspchew

  • Low End (2000 rpm)
  • **
  • Posts: 320
Re: Pls advice...
« Reply #14 on: October 13, 2009, 12:10:25 PM »
car is 4 yrs+, so I am looking for a more comfort absorber as replacement. Current set still ok but I find it a bit harder than before.

Same here, mine is also about 4yrs+, front shocks are harder than the day I got it. Mentioned to AS during 70k km servicing and they told me my shocks are jammed. :confused1:


Offline crusty69

  • Low End (2000 rpm)
  • **
  • Posts: 431
Re: Pls advice...
« Reply #15 on: October 13, 2009, 07:22:00 PM »
haha ok,,i used to get that sound right after changing to 16" ,.. ,.pong !! like something hit against a metal drum kind of sound,....
If you wanna dream,  dream BIG !

Offline RG

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 574
  • Driving Slowly Will be a BONUS for me..
Re: Pls advice...
« Reply #16 on: October 14, 2009, 09:11:15 AM »
Monroe shocks are good.

our car got monroe ar bro?for comfort issit?
(ProJect L) Who says Latio CMI? watch this http://www.youtube.com/watch?v=xGMOOccMvEI

Offline kspchew

  • Low End (2000 rpm)
  • **
  • Posts: 320
Re: Pls advice...
« Reply #17 on: October 14, 2009, 01:53:44 PM »
Guys, I found another stockist for KYB. Got my shocks today, $110/front shock and $55/back shock exl GST.
Details as follow,

Chop Aik Huat, look for Mr Ong.
261 Waterloo st, #01-39

Will be heading to AS to fix them up tml

Offline NSman

  • High End (5000 rpm)
  • *****
  • Posts: 3,824
  • :[踢踏e族]:
Re: Pls advice...
« Reply #18 on: October 14, 2009, 03:53:17 PM »
Guys, I found another stockist for KYB. Got my shocks today, $110/front shock and $55/back shock exl GST.
Details as follow,

Chop Aik Huat, look for Mr Ong.
261 Waterloo st, #01-39

Will be heading to AS to fix them up tml

Issit the same KYB shock quote by 62 Race Course Road ?? this is more expensive wor...

Quote
Chin Hon motors & tradings, they carry KYB shocks, approx $90/shock for front and $50/shock for the back.
Stocks might be arriving next week.
Address :  62 Race Course Road
"We, the La-tions of Sillypore,
Pledge ourselves as one United Road-User,
Regardless of Bhp, NA or TurboCharged,
To Build a LTA-less Society,
Based on Modifications and No TP,
So as to Acheive Roadhog Elimination, No ERP and
Automotive Progress for our Nation."

Offline kspchew

  • Low End (2000 rpm)
  • **
  • Posts: 320
Re: Pls advice...
« Reply #19 on: October 14, 2009, 04:19:25 PM »
Sama sama, but Chin Hon have no stocks and they dont even know when they will arrive :crying:
But my shocks keep "Ponging", and I worry that it will there will be further damage if they are not fixed.
The model for Latio is KYB Excel GR-02