Singapore Nissan Owners Group
Nissan Car Lounge - Almera, Juke, Latio, Qashqai, Sylphy, Teana Owners => Latio => Topic started by: byrion on February 25, 2010, 11:01:10 AM
-
I was surfing the msia latio forum and came across a thread selling new design armrest that comes in black and beige colour. Each cost about RM 220.. Can anyone advise if it's wise to get it?
Thank you in advance
-
you got the link? im interested
-
please see the link below
http://mylatioclub.forumup.com/viewtopic.php?t=1672&mforum=mylatioclub
-
stock arrives only in march and best of all after convert it cost S$100 nia compared to the cheong wan sellin here for 8O bucks, worst is the height is way toooo low need to slant ur body in order to rest ur arm on it.
Haiz i juz use it as an extra storage & to cover the gap btw the two frt seats.
-
Best is to wait for the stock arrived & some others have installed. Get their reviews & comments, the picture shown doesn't seem to fixed on a latio. moreover MY latio using handbrake, while our are footbrake, they might be some different in fitment.
-
anyone fit armrest on non-premium latio?
does the arm rest obscure the 2 drinks compartment?
-
eh.. it has extra "sliding" feature only ??
the size is the same ???
looking from the pic>> it seems like same height leh (estimate only)
-
i receive notice that the stocks has arrive.. the person has a workshop in JB, jalan lakin or he is willing to transport the things to sg but we need to install ourselves?
-
i receive notice that the stocks has arrive.. the person has a workshop in JB, jalan lakin or he is willing to transport the things to sg but we need to install ourselves?
Hi TS thanks for raising this thread! I am also looking out to install armrest but please correct me if I am wrong that installation process of this armest requires the removal of the center piece console and both the cup holders will be replaced by this armrest. Can any kind bros out there confirm this?
I am quite certain this cannot be a 'plug-and-play-DIY' job
-
Why dont we start a MO and if got the quantity, we can all meet up and let him install in sg since he is transporting over the stocks.
According to the MY latio should be plug n play require no drilling or srewing.
i receive notice that the stocks has arrive.. the person has a workshop in JB, jalan lakin or he is willing to transport the things to sg but we need to install ourselves?
-
ya.. i also think so installing the armrest should not be a plug and play thing since we have a console in the middle..but he insisted that its easy to install.. i have told him to bring a set out to sg for me... once i receive from him will update you guys again....
-
I got the original armrest from TCM's SA (she got this source from OEM), cost $350 and $20 installation. Is not really plug & play for my case as you can see from the picture that you need to dismantle the whole center console.
-
arias, did u get your arm rest installed at TC?
-
Interested in this armrest too.... do keep us informed bro once you have it installed...
-
arias, did u get your arm rest installed at TC?
Yes, installed at TC.
-
arias, can intro your SE ma? need to enquire whether the offer of 350 + 20 still exist
-
arias, can intro your SE ma? need to enquire whether the offer of 350 + 20 still exist
Spoke to my SE, no more 'lobang'
-
I got the original armrest from TCM's SA (she got this source from OEM), cost $350 and $20 installation. Is not really plug & play for my case as you can see from the picture that you need to dismantle the whole center console.
is the pic the armrest? where to rest the arms huh? this is the original one for the non-premium version right?
-
is the pic the armrest? where to rest the arms huh? this is the original one for the non-premium version right?
This is the original armrest, my previous photo shows that you have to dismantle that piece of center console in order to fit in this.
-
Eh bro, any lobang on this Malaysia Arm rest ?
I am interested in getting one also...
Thanks in advance !
-
no leh the seller seems to be m.i.a liaoz no news no nothin
-
Hi TS thanks for raising this thread! I am also looking out to install armrest but please correct me if I am wrong that installation process of this armest requires the removal of the center piece console and both the cup holders will be replaced by this armrest. Can any kind bros out there confirm this?
I am quite certain this cannot be a 'plug-and-play-DIY' job
The installation requires and involves
-the removal of the cigeratte butt holder with two side screws (at the back & bolts can been seen and need to remove it),
-exchange of the cupholder (there is a wire connected to the cupholder) with the armrest.
-Also requires the removal temporary of the gear top panel and the cigeratte charger top panel.
-The arm rest, need to open up 3 covers (front & sides) carefully as the clips are easily broken.
Overall, the side panel were not removed.
-
arias, can intro your SE ma? need to enquire whether the offer of 350 + 20 still exist
Install Latio arm rest last year Sep'09 in Ubi workshop near to TP cost $350. iIt's the original Latio arm-rest and the existing centre console has to be removed.
Recently, pass by the workshop and was told still bringing in the original arm-rest. Believe TC SE also go to him for installation as part of the freebies.
-
Hi Amazon,
May I ask for the name/address of this workshop? I am interested in installing the armrest for my Latio.
Thanks!