Singapore Nissan Owners Group

Nissan Car Lounge - Almera, Juke, Latio, Qashqai, Sylphy, Teana Owners => Latio => Topic started by: Latiorarri on March 26, 2010, 05:09:19 PM

Title: 205/50 R16 Tyre Pressure
Post by: Latiorarri on March 26, 2010, 05:09:19 PM

Hi folks,

Finally took the plunge yesterday and changed from stock tyres and rims to 205/50 R16 Yokohama A drive R01. Wanted GR90 but have to indent...

I think there was some mention before about the tyre pressure to use.. but can't seem to find the thread liao... can the bros/sis who are on the same profile share how much you are giving for your tyres?

TIA...  ;D

Title: Re: 205/50 R16 Tyre Pressure
Post by: SoL on March 26, 2010, 07:37:23 PM

Check the max sidewall pressure listed on the side of your tyres. Anything below that is fine.

Title: Re: 205/50 R16 Tyre Pressure
Post by: kenmaine1008 on March 29, 2010, 01:14:58 AM

205-50-16... same profile as mine.. i pumped my falken 912 at 240 front; 230 rear...

Title: Re: 205/50 R16 Tyre Pressure
Post by: zzyzx on March 29, 2010, 02:13:37 AM

same profile, pump 265 front and 255 aft.

Title: Re: 205/50 R16 Tyre Pressure
Post by: Latiorarri on April 01, 2010, 12:53:30 PM

Thanks guys... i went to buy a guage to check tyre pressure and found that all tyres pump to 250.. no wonder my wife complain rear very bumpy..

anyway did 245 (F) and 220 (R)

No regards man.. changing the tyre and rim really improved the car's handling.. should have done it much earlier. :thumbsup:

Title: Re: 205/50 R16 Tyre Pressure
Post by: kenmaine1008 on April 02, 2010, 10:22:45 AM

yup.. not only the handling and stability.. the car looks nicer with this profile 205-50-R16..  ;D

 ;) tinking of wat tyre to change next time.... 

Title: Re: 205/50 R16 Tyre Pressure
Post by: Latiorarri on April 02, 2010, 11:40:50 AM

First on my list was GR90... then Michelin PP2... :P can try.. Yoko was not on my list.. but all the rest no stock :S