« previous next »
Pages: [1]   Go Down

Author Topic: Latio Rear Logo  (Read 5177 times)

Offline Ice86

  • Idling (800 rpm)
  • *
  • Posts: 50
Latio Rear Logo
« on: March 25, 2009, 10:52:51 PM »
Hi guys, anyone know whether latio sedan rear logo is screwed on or glued on?
(Both the nissan logo and the Latio word)
Cos i wan to remove them. Any idea?
Logged

Offline SoL

  • Low End (2000 rpm)
  • **
  • Posts: 219
Re: Latio Rear Logo
« Reply #1 on: March 25, 2009, 11:08:48 PM »
I believe is glued on. I bought it 2nd hand and the previous owner removed it already, and there's no screw hole there.
Logged

Offline Silver

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 900
Re: Latio Rear Logo
« Reply #2 on: March 25, 2009, 11:21:46 PM »
Logged
Be safe. Go with the flo.

Offline mindman

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 493
Re: Latio Rear Logo
« Reply #3 on: March 25, 2009, 11:38:36 PM »
Quote from: Ice86 on March 25, 2009, 10:52:51 PM
Hi guys, anyone know whether latio sedan rear logo is screwed on or glued on?
(Both the nissan logo and the Latio word)
Cos i wan to remove them. Any idea?

any idea why u want to remove ? If removed,  ppl might not know is a
latio cheers
Logged

Offline Silver

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 900
Re: Latio Rear Logo
« Reply #4 on: March 25, 2009, 11:47:17 PM »
de-badging macam stylo mah
Logged
Be safe. Go with the flo.

Offline Ice86

  • Idling (800 rpm)
  • *
  • Posts: 50
Re: Latio Rear Logo
« Reply #5 on: March 25, 2009, 11:53:53 PM »
hEy silver thanks a lot for the thread link!
helps alot!
Logged

Offline alghojo

  • Low End (2000 rpm)
  • **
  • Posts: 157
Re: Latio Rear Logo
« Reply #6 on: March 26, 2009, 09:40:47 PM »
Its all glued confirmed, got my ride last month Latio sport 2nd week both nissan and latio logo removed, now behind all empty. i use nylon thread and thumb muscles.
Logged

Offline clarence

  • Max Torque (4400 rpm)
  • ****
  • Posts: 1,579
Re: Latio Rear Logo
« Reply #7 on: March 27, 2009, 09:44:18 AM »
After removing logo, spray a little WD40 onto a clean cloth and wipe it over the remaining sticky adhesive on the paintwork.

It works like magic in removing it.
Logged

ahhoe

  • Guest
Re: Latio Rear Logo
« Reply #8 on: March 27, 2009, 01:58:57 PM »
the whole process takes me 45 mins. Recommend to bring along a small cloth to hold onto the string. else will have a burning feeling becos of the constant "sawing".
Logged

Offline Ying

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 845
Re: Latio Rear Logo
« Reply #9 on: March 27, 2009, 02:52:43 PM »
I did not remove mine, but why not spay some WD40 on it, wait a few minute then start "sawing". Should be easier to removedright?
Logged

Offline pizzaboy

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 601
Re: Latio Rear Logo
« Reply #10 on: March 29, 2009, 05:37:37 PM »
another method is to pour some zippo lighter fluid and use a atm/credit card to de-badge the logo after dat alittle bit car liquid polish to remove the remains left by the double side tape.

It takes time and patience to acheive gd & beautiful results

Cheers!
Logged
Pages: [1]   Go Up
« previous next »