Author Topic: Anyone tried 195/60/R15 tyres on Stock RIMs? (Read 17688 times)

jliow · « **on:** April 20, 2009, 03:55:45 AM »

Cannot find the J50 specs for the tyres I wanted. Closest match is a 195/60/R15 spec. Not sure any bros here did that and if can share pic

was worried on 2 aspects. 60 being a bit low. 195 being too bulging.

Appreciate any sharing of info

clarence · « **Reply #1 on:** April 20, 2009, 04:22:15 AM »

I have seen a Latio on 195/60R15.

It fits but the tyre bulges out from the rims a little.

Not a problem if you don't mind the looks.

kspchew · « **Reply #2 on:** April 20, 2009, 08:39:10 AM »

Quote from: jliow on April 20, 2009, 03:55:45 AM

Cannot find the J50 specs for the tyres I wanted. Closest match is a 195/60/R15 spec. Not sure any bros here did that and if can share pic

was worried on 2 aspects. 60 being a bit low. 195 being too bulging.

Appreciate any sharing of info

I am using this profile, no bulging at all

Zippy · « **Reply #3 on:** April 20, 2009, 10:08:28 AM »

Hi! I'm using 195/65 R15, which is even higher. But no issues - did not notice any bulges at all!

According to my SE, 195/60 R15 is very common size for Latio coz of better grip compared to 185. So i dun think it's any issue using it. As you can see, i even went for a slightly thicker one at 65 for a bit more comfort. Been using it since July 2008 and no problems at all.

kenmaine1008 · « **Reply #4 on:** April 20, 2009, 01:17:52 PM »

hmm... hw abt the ideal size for 16" and 17" rims?

david1881 · « **Reply #5 on:** April 20, 2009, 02:01:43 PM »

Quote from: clarence on April 20, 2009, 04:22:15 AM

I have seen a Latio on 195/60R15.

It fits but the tyre bulges out from the rims a little.

Not a problem if you don't mind the looks.

I prefer the tyre to bulge out from the rims, rims are less likely to scratch the curbs

Jazz · « **Reply #6 on:** April 20, 2009, 02:47:13 PM »

When you see tyre bulge out, it time to go pump pressure.

Nowadays tyres usually have rim protector to protect your rim, but if the force impact is great, it won't help much too.

jliow · « **Reply #7 on:** April 20, 2009, 02:55:39 PM »

Quote from: kspchew on April 20, 2009, 08:39:10 AM

I am using this profile, no bulging at all

kspchew bro dun mind the trouble if can share pic? Thanks

Toalson · « **Reply #8 on:** April 20, 2009, 11:40:24 PM »

Was on 195/60R15 on the stock rims. 2 issues
1st - it did not look too nice
2nd - the ride was way too bouncy

Now on 16" 205/50R16 and the feels more stable.

clarence · « **Reply #9 on:** April 21, 2009, 01:44:43 AM »

Quote from: Toalson on April 20, 2009, 11:40:24 PM

Was on 195/60R15 on the stock rims. 2 issues
1st - it did not look too nice
2nd - the ride was way too bouncy

Now on 16" 205/50R16 and the feels more stable.

How is your fuel consumption on 205 compared to stock 185 tyres?

clarence · « **Reply #10 on:** April 21, 2009, 01:46:06 AM »

Quote from: Zippy on April 20, 2009, 10:08:28 AM

Hi! I'm using 195/65 R15, which is even higher. But no issues - did not notice any bulges at all!

According to my SE, 195/60 R15 is very common size for Latio coz of better grip compared to 185. So i dun think it's any issue using it. As you can see, i even went for a slightly thicker one at 65 for a bit more comfort. Been using it since July 2008 and no problems at all.

This will result in incorrect / inaccurate speedometer reading.

jliow · « **Reply #11 on:** April 21, 2009, 02:03:55 AM »

after using this calculator http://www.miata.net/garage/tirecalc.html i think quite ok for me to go with 195/60 R15 tyres since the difference is so marginal.

But still hope some bro can share pics.

clarence · « **Reply #12 on:** April 21, 2009, 02:05:14 AM »

Yes, 195/60R15 is highly recommended over 195/65R15.

Toalson · « **Reply #13 on:** April 21, 2009, 07:48:17 AM »

Quote from: clarence on April 21, 2009, 01:44:43 AM

How is your fuel consumption on 205 compared to stock 185 tyres?

Currently still running on mineral and the FC hovers ard 12+km/l But if travel more on highway can easily achieve 14 - 15 imho.

kspchew · « **Reply #14 on:** April 21, 2009, 08:34:46 AM »

Quote from: jliow on April 20, 2009, 02:55:39 PM

kspchew bro dun mind the trouble if can share pic? Thanks

My working place block image shack and photo bucket.any bro can have any other better ways to post pict?

jliow · « **Reply #15 on:** April 21, 2009, 11:07:49 AM »

what abt yahoo flicker? or can PM me I help u post

kspchew · « **Reply #16 on:** April 21, 2009, 01:02:30 PM »

Quote from: jliow on April 21, 2009, 11:07:49 AM

what abt yahoo flicker? or can PM me I help u post

PM you already

SpeedLimit · « **Reply #17 on:** May 06, 2009, 11:16:15 PM »

Hi, jz to share for those who want to keep your 15" rim...

Jz change to k415 195/60R15
Look: better compare to stock with a little bulge out which i dun mind.
Noise: quieter than stock and can feel the comfort as well.
Grip: good that make my pickup abit slower and corning is much stable

Need to do some mod to improve the pickup....

any recommendation??

Hi, above is my personnel opinion and compare to stock
still awaiting to try on wet road.

Overall : Good

tayyw76 · « **Reply #18 on:** May 06, 2009, 11:26:27 PM »

If u du want to upsize rims to 16" or 17" but want better stability and grip on the road then u got no choice but to use 195/60/R15....

SpeedLimit · « **Reply #19 on:** May 07, 2009, 12:02:39 AM »

Quote from: tayyw76 on May 06, 2009, 11:26:27 PM

If u du want to upsize rims to 16" or 17" but want better stability and grip on the road then u got no choice but to use 195/60/R15....

True, but u can choose the brand of tyre.

News:

Author Topic: Anyone tried 195/60/R15 tyres on Stock RIMs? (Read 17688 times)