Author Topic: Latio can not jump start?  (Read 12618 times)

Offline iagree

  • High End (5000 rpm)
  • *****
  • Posts: 3,621
  • iagree!
Re: Latio can not jump start?
« Reply #20 on: November 17, 2008, 10:47:11 AM »
hi

why battery flat and cause such a jialat thing?
the battery wont be totally gone case right?

i will chg my battery when it hit 40000km or in the next servicing (now 34k already).

regards.
sorry, i must agree because i don't know how to disagree. agreeeee only....

from
   -iagree, must agree

jing

  • Guest
Re: Latio can not jump start?
« Reply #21 on: November 17, 2008, 07:48:53 PM »

I have used my petrol driven car to jump start a diesel Eurovan before, with success.

I am surprised that AA guy gave you such an answer.

He needs to attend a refresher course.  ;D

I did try to jumpstart a van using my car...and it didn't work. When I asked why, the AA guy told me different voltage between petrol and diesel vehicle.

hmm....

Offline Jazz

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,097
Re: Latio can not jump start?
« Reply #22 on: November 17, 2008, 10:10:26 PM »
I did try to jumpstart a van using my car...and it didn't work. When I asked why, the AA guy told me different voltage between petrol and diesel vehicle.

hmm....

Diesel vehicle not using 12V battery meh ? Interesting.

Offline clarence

  • Max Torque (4400 rpm)
  • ****
  • Posts: 1,579
Re: Latio can not jump start?
« Reply #23 on: November 17, 2008, 10:33:12 PM »
I can't recall the voltage in diesel vehicle's battery, but diesel vehicles use higher voltage than petrol vehicles as they run on high compression and consume more battery power.

Diesel vehicles also do not use any spark plugs,

They have glow plugs to start the engine.
« Last Edit: November 17, 2008, 10:37:23 PM by clarence »

Offline david1881

  • Low End (2000 rpm)
  • **
  • Posts: 180
Re: Latio can not jump start?
« Reply #24 on: November 18, 2008, 01:04:45 AM »
Diesel vehicles (pick up, van, eurovan, taxi) also uses same voltage as car, 12V.
But heavy goods vehicles (truck, trailer, sbs/smrt buses...) using 24V.

Offline detach8

  • Low End (2000 rpm)
  • **
  • Posts: 259
Re: Latio can not jump start?
« Reply #25 on: November 20, 2008, 02:55:41 PM »
ah ton of bullshit

12v for diesel or petrol cars is standard
big one use 24v

all are negative ground

it might be insufficient current or faulty cabling. in that case the taxi have to stop the engine first to ensure that the engine nto drawing current.. but usually cant be cos the alternator is still running to charge the battery

if you connect wrong polarity the battery would have already explode

did you check your internal resistance of your battery?