« previous next »
Pages: [1]   Go Down

Author Topic: Engine Oil 10W50  (Read 5494 times)

Rayson

  • Guest
Engine Oil 10W50
« on: January 15, 2009, 11:05:12 PM »
Hi Guys,

I have gotten 2 bottles of 10W50 recently. Is it too thick for latio? Mine is Latio Sedan. If unsuitable, can you introduce me a good brand and location to buy with the model to be bought?

Also, just bring 4 litres will do? I am going for 10k Servicing soon. Thanks bros.
« Last Edit: January 15, 2009, 11:09:57 PM by Rayson »
Logged

Offline maxngck

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 653
Re: Engine Oil 10W50
« Reply #1 on: January 16, 2009, 07:23:53 AM »
hi!

think 10w50 is way too thck liao. i am using 5w40 and the TCM officer was saying it is more for 1.8l and above. but still ok to use on latio. if u use it, think will make ur car 'retarded' and ur fc may be affected as ur engine may b struggling.
Logged

Offline mindman

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 493
Re: Engine Oil 10W50
« Reply #2 on: January 16, 2009, 10:56:00 AM »
Quote from: Rayson on January 15, 2009, 11:05:12 PM
Hi Guys,

I have gotten 2 bottles of 10W50 recently. Is it too thick for latio? Mine is Latio Sedan. If unsuitable, can you introduce me a good brand and location to buy with the model to be bought?

Also, just bring 4 litres will do? I am going for 10k Servicing soon. Thanks bros.


amsoil 5w30. frm mxtradings.com around ubi.  no bad
cheers
Logged

Rayson

  • Guest
Re: Engine Oil 10W50
« Reply #3 on: January 16, 2009, 11:27:26 PM »
Thanks a lot for your infos guys.

So everytime I go , bring 4 litres will do?
Logged

Offline clarence

  • Max Torque (4400 rpm)
  • ****
  • Posts: 1,579
Re: Engine Oil 10W50
« Reply #4 on: January 17, 2009, 12:30:24 AM »
4 litres is enough for Latio.
Logged

Offline Carmodz

  • High End (5000 rpm)
  • *****
  • Posts: 4,733
Re: Engine Oil 10W50
« Reply #5 on: January 17, 2009, 01:13:17 AM »
Quote from: Rayson on January 16, 2009, 11:27:26 PM
Thanks a lot for your infos guys.

So everytime I go , bring 4 litres will do?

3.1L is the recommended amount. Its in the book, so its not my personal opinion im sharing.
Logged

Offline Jazz

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,097
Re: Engine Oil 10W50
« Reply #6 on: January 17, 2009, 01:35:36 AM »
Quote from: Carmodz on January 17, 2009, 01:13:17 AM
3.1L is the recommended amount. Its in the book, so its not my personal opinion im sharing.

In fact, sometime less than 3L, TCM uses 3 bottles of my own Amsoil which is 1 bottle about 0.967L. After a month I sent for wheel alignment, I kiasu ask the SE to check for me whether my EO is enough, he do it on the spot and check my dip stick, still on the high side and the oil is still very clean. Surprisingly.
Logged

Offline Carmodz

  • High End (5000 rpm)
  • *****
  • Posts: 4,733
Re: Engine Oil 10W50
« Reply #7 on: January 17, 2009, 01:10:15 PM »
Quote from: Jazz on January 17, 2009, 01:35:36 AM
In fact, sometime less than 3L, TCM uses 3 bottles of my own Amsoil which is 1 bottle about 0.967L. After a month I sent for wheel alignment, I kiasu ask the SE to check for me whether my EO is enough, he do it on the spot and check my dip stick, still on the high side and the oil is still very clean. Surprisingly.

yup, wat i did in the past was to bring 3 qtz of oil, then top up with 330ml of Teflon Engine Treatment.
Logged

Offline Silver

  • Mid Zone (3000 rpm)
  • ***
  • Posts: 900
Re: Engine Oil 10W50
« Reply #8 on: January 17, 2009, 01:51:08 PM »
3.3 litre (including oil filter)

3.1 litre (excluding oil filter)
Logged
Be safe. Go with the flo.

Offline Jazz

  • Max Torque (4400 rpm)
  • ****
  • Posts: 2,097
Re: Engine Oil 10W50
« Reply #9 on: January 17, 2009, 03:36:58 PM »
Quote from: Carmodz on January 17, 2009, 01:10:15 PM
yup, wat i did in the past was to bring 3 qtz of oil, then top up with 330ml of Teflon Engine Treatment.

Everytime you top up with Teflon Engine Treatment? For simi purpose ha ?
Logged
Pages: [1]   Go Up
« previous next »